Solenoid Valves

All models operate on 12V DC, using less than 10 Watts. This is the electrically operated water switch which is cut into the riser pipe, between the taps (or mixer) and the shower outlet. The Retrofit solenoid valves are fitted at the shower head. You can purchase your own solenoid valve or we can supply you one of three models to suit your choice of controller.

Standard model

Glass reinforced nylon. 20mm male in x 20mm male out. Weight 150gm.

Our price $35

Domestic Retrofit model Aust. and NZ

Glass reinforced nylon. 15mm female in x 15mm male out. Weight 110gm.

Our price $35

Domestic Retrofit model USA

Glass reinforced nylon. 15mm male in x 15mm female out. Weight 110gm.

Our price $45

Commercial Retrofit model

DZ Brass. 15mm female BSP in x 15mm BSP male out. Weight 450gm

We can supply male in and female out for the USA market.

Our price $140

Power pack

Our a power pack, suitable for Australia and New Zealand comes with a 1.8m low voltage lead, sufficient for standard ceiling height.

• Input Voltage and configuration to suit local power supply
• Output 12 V DC Regulated, 10 Watts minimum
• 2.1mm DC plug to suit the circuit board input socket

Our price $35

Power consumption

Approximately 1.9 Watts on standby (less than a microwave oven). 9.6 Watts during active shower time. At 20c per KwattHour that costs about 1 cent for every 300 minutes of shower time.

Shower controller complete unit

Comes with power and appropriate solenoid valve

Note: All prices are in Australian dollars.

Purchase a Shower Timer