Saving
Water
Our
society is increasingly aware of the need for saving water. A significant
amount of this commodity is used in the shower where most people
enjoy the comforting sensation long after the time required to effectively
clean the body. The owner of the establishment pays for the cost
of this wasted water and for the heating thereof, and it is recognised
that ultimately the cost to our society will be a major problem.
Studies
have shown that in the average Australian household approximately
30% of the total water used goes down the bathroom drains. Most
of this is from showers. Showertimer is an effective method of saving
water.
Restricted
flow shower heads are designed for saving water and there have been
numerous devices designed to time the shower. One water saving device
provides a visual display for the user in the form of a timer fixed
to the wall in the shower. Other water saving devices have incorporated
an audible signal, some in conjunction with a visual indication
of time elapsed. There are water saving devices available which
shut off the water supply after a pre-determined time. However,
the user can re-start the shower immediately and therefore, as a
controller, even this device is severely limited. Indeed, none of
these water saving devices provide effective control.
Showertimer
is a water saving device which not only indicates the remaining
shower time visually and audibly and ultimately shuts off the water
but also prevents an immediate follow on shower, thus saving water
and heating cost.
Surveys
have determined that the average shower time in the family home
is more than twice the time reasonably required for washing the
body, the hair and cleaning the teeth. Most people can easily achieve
this in less than six minutes but the average shower time exceeds
twelve minutes. The flow rate from showers varies from 8 litres
per minute to as much as 35 litres per minute. A twelve minute shower
using 12 litres per minute will use a total of 144 litres of water.
Showertimer set to six minutes will achieve water saving of 72 litres
per shower. In a home where five showers are taken per day, that
is an annual water saving of over 130,000 litres and a potential
heating saving of more than $1,000. See Saving
Gas and Saving Electricity.
To
calculate the potential water saving and heating cost of your shower,
download our shower Savings
Calculator.
For
more information on saving water and water conservation, you might
find the resources on our links
page helpful.
|